Show Ip Route - Siemens SIMATIC NET Configuration Manual

Industrial wireless lan to ieee 802.11n command line interface

Hide thumbs Also See for SIMATIC NET:

Table of Contents

show ip route

This command shows the routes currently being used.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call up the command with the following parameters:

show ip route[{<ip-address>[<mask>]|connected|static}]

The parameters have the following meaning:

The routing table is displayed.

SCALANCE W760/W720 to IEEE 802.11n Command Line Interface

Configuration Manual, 10/2015, C79000-G8976-C351-05

shows the information for a specific IP address

defines an address range using the subnet mask

Shows the direct connections

Shows the static connections

Network protocols

7.1 IPv4 protocol

Range of values /

enter a valid IP ad-

/8, /16 or /24

Show Quick Links

Table of Contents

Scalance w720 Scalance w760