Wlan Dfs - Siemens SIMATIC NET Configuration Manual

Industrial wireless lan to ieee 802.11n command line interface

Hide thumbs Also See for SIMATIC NET:

Table of Contents

Network structures

wlan dfs

With this command, you enable the "DFS(802.11h)" function. If the access point discovers a

disruption on the current channel, for example due to a radar device, it automatically

switches to an alternative channel.

● Frequency band 5 GHz is used.

In client mode, a mixed frequency band mode is possible (2.4 - 5 GHz).

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call the command without parameter assignment:

The DFS function is enabled.

Further notes

You display the setting with the

You disable the function with the

Table of Contents

Scalance w720 Scalance w760