Wlan Alternative Channel (Access Point) - Siemens SIMATIC NET Configuration Manual

Industrial wireless lan to ieee 802.11n command line interface

Hide thumbs Also See for SIMATIC NET:

Table of Contents

wlan alternative channel (access point)

If you have activated the DFS function, you specify the alternative channel with this

command. If the access point on the current channel discovers a disruption, it switches to

the alternative channel.

This command is available only in access point mode.

● The DFS function is enabled.

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call up the command with the following parameters:

wlan alternative channel { show-channels | <number (0=auto)> }

The parameters have the following meaning:

show-channels

The alternative channel is set.

Further notes

You display the setting with the

You enable the DFS function with the

Table of Contents

Scalance w720 Scalance w760