No Vlan - Siemens SIMATIC NET Configuration Manual

Industrial wireless lan to ieee 802.11n command line interface

Hide thumbs Also See for SIMATIC NET:

Table of Contents

Network structures

no vlan

With this command, you delete a VLAN on the device.

● The VLAN must not be assigned to a physical port.

● You are in the Global Configuration mode.

The command prompt is as follows:

cli(config)#

Call up the command with the following parameter:

no vlan <vlan-id(2-4094)>

The VLAN with number 1 cannot be deleted.

The VLAN is deleted

Further notes

You can display information about the VLAN with the

Number of the addressed VLAN

command, you create a VLAN on the device.

Range of values / note

SCALANCE W760/W720 to IEEE 802.11n Command Line Interface

Configuration Manual, 10/2015, C79000-G8976-C351-05

Show Quick Links

Table of Contents

Scalance w720 Scalance w760