Show Ip Dns Statistics; Commands In The Global Configuration Mode - Siemens SIMATIC NET Configuration Manual
Industrial wireless lan to ieee 802.11n command line interface
Hide thumbs
Also See for SIMATIC NET:
- System manual (372 pages) ,
- Manual (300 pages) ,
- Operating instructions manual (90 pages)
Table of Contents
Advertisement
Network protocols
7.1 IPv4 protocol
Result
The table with the information about the DNS servers is displayed.
7.1.1.8
show ip dns statistics
Description
This command shows DNS statistics. It provides information about the type and number of
queries to the DNS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dns statistics
Result
Information about the communication with the DNS server is displayed.
7.1.2
Commands in the global configuration mode
This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
Privileged EXEC mode again.
286
or
cli#
command to change to this mode.
configure terminal
or
end
exit
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
command and are then in the
Hide quick links:
Advertisement
Table of Contents
