IBM Infoprint 1130/1140
Disabling Download Emulations
Error Code 964: Download Emulation CRC Failure. Checksum
failure detected in the emulation header or emulation file.
Error Code 965: Download Emulation Outdated. Time stamps
indicate the download emulation and RIP code are incompatible.
To help resolve Download Emulation problems the following steps
are necessary to instruct the printer to POR without activating any
download emulations.
To Disable the Download Emulation:
1. Turn the printer off.
2. Press and hold the Go and Menu buttons.
3. Turn the printer on and release the buttons once "Performing
Self Test" displays.
– Once the printer is idle, the emulation can be downloaded
again.
4. Program the download emulation into the code overlay card
assembly again.
5. If these steps do not resolve the problem, replace the code
overlay card assembly and download the emulation again.
Duplex Tests
Duplex Quick Test
This test is used to verify that the Duplex Option Top Margin is set
correctly. This test prints a duplexed version of the Quick Test Page
that can be used to adjust the Top Margin for the backside of the
duplexed page. You can run one duplexed page (Single) or continue
printing duplexed pages (Continues) until Return/Stop is pressed.
The paper you choose to print the page on should be either Letter or
A4.
To run the Duplex Quick Test:
1. Select Duplex Quick Test from the menu.
2. Select Single or Continuous.
3-8
Service Manual