Table of Contents
Advertisement
IBM Infoprint 1130/1140
User Message
Primary
230 Paper Jam
Check Duplex
24X Paper Jam
Check Tray X
250 Paper Jam
Check MP Feeder
2-30
Service Manual
User
Message
Explanation
Secondary
Leave Job in
Primary: The paper is most likely
Finisher
jammed in the Duplex Unit. Remove the
duplex front cover to access the jam
area. If the paper is jammed in the rear
of the duplex, then replace the duplex
front cover and open the duplex rear
door. If the paper is not jammed in the
duplex unit, then it may be jammed in
the rear of the printer. Open the printer
rear door to access the jam.
Secondary: When this message is
displayed, do not remove accumulated
sheets during the jam clearance
procedure as the printer will not reprint
the removed sheets. Also, if the
accumulated sheets are removed, the
portion of the job printed after the jam
will not be stapled.
Leave Job in
Primary: Paper is jammed around Tray
Finisher
X (X=tray 1 thru 5). Try opening Tray X.
If the tray is difficult to remove, then you
may have to remove the tray above or
below tray X to remove the jammed
pages.
Secondary: When this message is
displayed, do not remove accumulated
sheets during the jam clearance
procedure as the printer will not reprint
the removed sheets. Also, if the
accumulated sheets are removed, the
portion of the job printed after the jam
will not be stapled.
Leave Job in
Primary: Paper is jammed in the
Finisher
multipurpose feeder.
Secondary: When this message is
displayed, do not remove accumulated
sheets during the jam clearance
procedure as the printer will not reprint
the removed sheets. Also, if the
accumulated sheets are removed, the
portion of the job printed after the jam
will not be stapled.
Advertisement
Table of Contents
