Table of Contents
Advertisement
IBM Infoprint 1130/1140
Fuser Cover
1. Remove the fuser assembly.
2. Note the thermistor cable routing and disconnect the cable.
3. Warning: Hold the left lamp bracket and carefully remove the
two mounting screws. There is pressure against the other end
of the lamp therefore care must be used when removing the
lamp from the fuser. Grip the lamp by the ceramic end piece
and remove it from the fuser assembly. Be careful not to touch
the glass as skin oils and acids can reduce the life of the lamp.
4. Remove the right lamp bracket mounting screws (A).
5. Remove the left and right fuser cover mounting screws (B) and
lift the cover from the fuser assembly.
Fuser Detack Fingers
1. Remove the fuser assembly.
2. Remove the fuser cover assembly.
3. Remove the fuser detack housing assembly.
Repair Information
4-31
Advertisement
Table of Contents
