Table of Contents
Advertisement
IBM Infoprint 1130/1140
Step 2 - During POST the stapler option tries to home.
Note: When a 990 Service Error is displayed during POST, the
failure is usually in the stapler mechanical unit or stapler card.
281 Paper Jam - The paper feeds partway into the Standard Bin
even if Finisher Option selected
When a 900 Service Error is displayed during
Note:
POST the failure is usually in the stapler gearbox
assembly or stapler cartridge.
FRU
1
DC Motor in Drive Gearbox
Assembly
Stapler Card Assembly
2-130
Service Manual
.
Action
Turn the printer off, disconnect the
motor from J4 and check for continuity
between J4 pins 1, 2, 5, and 6 on the
cable and the motor case. If you get
continuity, replace the drive gearbox
assembly. If you do not measure
continuity, continue with this step.
Check the voltages on connector J4.
Note: All voltages are approximate
values
Pin
Voltage
No.
Static
1
+24 V dc
2
+24 V dc
3
Not Used
4
Ground
5
+5 V dc
6
+5 V dc
If the voltages are correct, replace the
mechanical drive assembly. If the voltages
are incorrect, replace the stapler card assembly.
Voltage
Feeding
+24 V dc
Varies +11 V dc
to +24 V dc
Varies +3 V dc
to +5 V dc
+5 V dc
Advertisement
Table of Contents
