Table of Contents
Advertisement
System settings
Click System from the menu to customize the information that is displayed on the
UPS Properties page (see "UPS properties" on page 20).
You can configure the following network management card system settings:
v UPS Contact: Enter the name of the person who is responsible for UPS
v UPS Location: Enter a description of the physical location of the UPS in your
v UPS Custom Name: An alias personalization of the UPS name. The limit is 31
v Default Language: Select one of the available languages (English, French,
v History log interval (sec): Enter the length of time (in seconds) that the
v Environment log interval (sec): Enter the length of time (in seconds) that the
v Log Delimiter: Select the delimiter that is used in the log saved file. The default
v Save: Save any changes that you have made on the System Settings page.
administration at the IT network level or the person who is responsible for
electrical maintenance. This field is not displayed on any other web page. The
limit is 49 characters. The default is Computer Room Manager.
installation (for example, Computer Room E1-C066). This text is displayed on the
home page. The limit is 31 characters. The default is Computer Room.
characters. The default is UPS.
Spanish, German, Simplified Chinese, Japanese, Russian, Korean, or Traditional
Chinese) to enable initialization of the browser language at the network
management card connection. To change the language of the web interface
pages, restart your browser after you change this setting.
measurement history log is saved. Valid values are 5 to 99999. The default is 60.
temperature and humidity measurement log is saved. Valid values are 60 to
99999. The default is 300.
Note: The Environment log interval parameter is displayed only if an optional
environmental monitoring probe is installed.
is Tab.
Chapter 3. Using the network management card web interface
41
Hide quick links:
Advertisement
Table of Contents
