4. Make sure that the UPS is turned on. After the initialization process is
completed, type USERID at the prompt. The network management card main
menu is displayed.
__________________________________________________
IBM NETWORK MANAGEMENT CARD :
__________________________________________________
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
0 : Exit
__________________________________________________
1 : Reset
Two options are available for resetting the network management card:
v Hardware Reset: Select this option to reset the hardware. This is equivalent to
restarting the electrical power supply.
v Restart application: Select this option to restart only the application.
-----------------------------------------------------------------------------
Reset
-----------------------------------------------------------------------------
1 : Hardware Reset
2 : Restart application
0 : Exit
-----------------------------------------------------------------------------
2 : Network configuration
Select this option to display additional options for network settings.
-----------------------------------------------------------------------------
Network settings
-----------------------------------------------------------------------------
1 : Read Network settings
2 : Modify Network settings
3 : Set Ethernet speed
0 : Exit
-----------------------------------------------------------------------------
Three options are available for the network settings:
v Read Network settings: Select this option to view the IPv4 or IPv6 network
settings.
Network configuration :
MAC address : 00:20:85:FD:1C:07
Mode : Static IP
IP address : 166.99.18.129
Subnet mask : 255.255.248.0
Gateway : 166.99.17.1
Link Local IPv6 address : FE80::220:85FF:FEFD:4210 /64
Global IPv6 address : 2001:720:410:100A:220:85FF:FEFD:4210 /64
Global IPv6 address : 1789:720:410:100A:220:85FF:FEFD:4210 /64
Chapter 2. Installing and configuring the network management card
17