Table of Contents
Advertisement
3. Connect the RJ-45 end of the serial communication cable (which comes with
4. Connect the other end of the serial communication cable to the serial (COM)
5. On the computer, start a terminal emulation program, such as HyperTerminal.
12
Network Management Card : User's Guide
the network management card) to the settings/sensor connector on the network
management card.
Note: Make sure there is a physical RS-232 DB-9 port on the computer that
you are connecting to the UPS. Do not use RS-232 to USB converter
cables.
connector on a computer.
Select the following settings and click OK:
v Bits per second: 9600
v Data bits: 8
v Stop bits: 1
v Parity: None
v Flow control: None
v Locally reproduce the characters entered option: Disabled
Hide quick links:
Advertisement
Table of Contents
