Table of Contents
Advertisement
Installing the network management card in the UPS
You can install the IBM Network Management Card in an IBM UPS that has a
communication bay. You do not have to turn off the UPS or disconnect the load.
To install the network management card, complete the following steps:
1. Record the network management card MAC address for future reference. The
2. Remove the two screws from the UPS communication bay cover and remove
MAC address is on the label on the front of the network management card.
the cover. For the location of the bay for your model, see the Installation and
Maintenance Guide that comes with the UPS.
Notes:
a. The UPS can remain online while you install the network management card.
b. The orientation of the communication bay on your UPS model might be
different from what is shown in the following illustration. You might have to
rotate the network management card to install it.
Chapter 2. Installing and configuring the network management card
9
Hide quick links:
Advertisement
Table of Contents
