Table of Contents
Advertisement
2
3
Figure 61. Replacing the 2076-92F top cover
4. Verify that the cover correctly engages the cover release latch and all of the
5. Lock the cover into position by sliding the release lever 4 , as shown in
4
Figure 62. Locking the top cover
Installing or replacing a drive: 2076-92F
Use the following procedure to install a drive for the first time or to replace a
faulty drive in a 2076-92F expansion enclosure with a new one received from FRU
stock.
Before you begin
Important:
v You can replace a drive assembly without powering off the expansion enclosure.
v Ensure that the drive that you are replacing is not a spare or a member of an
66
Storwize V7000 Gen2 and Gen2+: Quick Installation Guide
3
inset tabs on the expansion enclosure.
Figure 62
However, to maintain operating temperature, do not keep the cover off an
operational enclosure for more than 15 minutes. The reduction in airflow
through the enclosure might cause the enclosure or its components to shut down
to protect from overheating.
array. The drive status is shown in Pools > Internal Storage in the management
GUI. If the drive is a member of an array, follow the fix procedures in the
Advertisement
Table of Contents
