Table of Contents
Advertisement
Before you begin
CAUTION:
The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially
trained persons, a lifting device, or both to safely lift this part or unit. (C011)
CAUTION:
To avoid personal injury, before lifting this unit, remove all appropriate
subassemblies per instructions to reduce the system weight. (C012)
Important: Before you unpack, move, install, or service the 2076-92F expansion
enclosure and its parts, always complete the following tasks:
v Read and follow the safety notices and instructions, as described in "Safety
v Read and follow the guidelines that are described in "Weight considerations: 5U
v Ensure that a suitably rated mechanical lift is available to support the weight of
About this task
The 2076-92F expansion enclosure and most parts are shipped together in one large
box. A tray on the top of the enclosure contains the front fascia (1U and 4U pieces),
the cable management arm (CMA), and the slide rail kit; you must install these
parts. Figure 31 shows how the enclosure is packaged for shipment.
Figure 31. Tray containing expansion enclosure parts
44
Storwize V7000 Gen2 and Gen2+: Quick Installation Guide
33.6-46.3 kg (74-102 lbs) 46.3-61.7 kg (102-136 lbs)
notices and considerations: 2076-92F" on page 29.
SAS expansion enclosure" on page 35.
the expansion enclosure as it inserted into the rack for installation.
1
2
> _
61.7-100 kg (136-220 lbs)
3
Advertisement
Table of Contents
