Table of Contents
Advertisement
GE
Direction 5370626-100, Revision 18
10-5-2-2
Peripheral/Option Checks
If any peripherals or options are not part of the system configuration, the check can be omitted. Refer
to the User Manual for a list of approved peripherals/options.
Table 10-6
Step
1
B/W Printer Verify hardcopy output of the B/W video page printer. Clean heads and covers if necessary.
2
Color Printer Verify hardcopy output of the Color video page printer. Clean heads and covers if necessary.
3
4
Footswitch
5
6
10-5-3
Input Power
10-5-3-1
AC/DC Adapter Inspection
Table 10-7
Step
1
Unplug Cord Disconnect the mains cable from the wall and system.
2
3
10-5-4
Cleaning
10-5-4-1
General Cleaning
Table 10-8
Step
1
2
Probe Holder Clean probe holders. (they may need to be soaked to remove excess gel).
3
GE Approved Peripheral/Hardware Option Functional Checks
Item
DICOM
Verify that DICOM is functioning properly. Send an image to a DICOM device.
Verify that the footswitch is functioning as programed. Clean as necessary.
ECG
Verify basic operation with customer.
DVD
Verify that the DVD is functioning properly. Clean heads and covers if necessary.
AC/DC Adapter Inspection
Item
Inspect
Inspect it and its connectors for damage of any kinds.
Verify that the LINE wires are properly attached to the terminals, and that no strands may cause a short
Verify
circuit.
General Cleaning
Item
Remove the battery. Use a fluid detergent in warm water on a soft, damp cloth to carefully wipe the entire
Console
system. Be careful not to get the cloth too wet so that moisture does not enter the console.
Use a soft, non-abrasive folder cloth. Gently wipe the LCD face. DO NOT use a glass cleaner that has a
LCD
hydrocarbon base (such as Benzene, Methy Alcohol or Methy Ethyl Ketone) on LCD with the filter (anti-
glare shield).
Chapter 10 Care & Maintenance
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Description
Description
Description
10-7
Advertisement
Table of Contents
