System Board; Removing The System Board - Dell Vostro 5320 Service Manual
Hide thumbs
Also See for Vostro 5320:
- Service manual (116 pages) ,
- Setup and specifications manual (30 pages) ,
- Setup and specifications (23 pages)
Table of Contents
Advertisement
Steps
1. Using the alignment posts, place the power-button with fingerprint reader, along with its cable, into the slot on the palm-rest
and keyboard assembly.
2. Adhere the tape that secures the power-button with fingerprint-reader cable to the palm-rest and keyboard assembly.
Next steps
1. Install the
I/O
board.
2. Install the
left
fan.
3. Install the
base
cover.
4. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
NOTE:
Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup
program after you replace the system board.
NOTE:
Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup
program. You must make the appropriate changes again after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the location of the connectors so that you can
reconnect the cables correctly after you replace the system board.
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
M.2 2230 solid-state drive
5. Remove the
wireless
card.
After working inside your
Before working inside your
or
M.2 2280 solid-state
computer.
computer.
drive, whichever applicable.
Removing and installing components
47
Advertisement
Table of Contents
