Coin-Cell Battery; Removing The Coin-Cell Battery - Dell Vostro 5320 Service Manual
Hide thumbs
Also See for Vostro 5320:
- Service manual (116 pages) ,
- Setup and specifications manual (30 pages) ,
- Setup and specifications (23 pages)
Table of Contents
Advertisement
Steps
1. Using the alignment posts, place the battery on the palm-rest and keyboard assembly.
2. Lift the Mylar to access the battery connector and connect the battery cable to the system board.
3. Place the Mylar over the M.2 solid-state drive.
4. Replace the five screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
CAUTION:
Removing the coin-cell battery resets the BIOS setup program's settings to default. It is
recommended that you note the BIOS setup program's settings before removing the coin-cell battery.
2. Remove the
base
cover.
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
About this task
The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the removal
procedure.
30
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Before working inside your
Advertisement
Table of Contents
