Heat Sink; Removing The Heat Sink - Dell Vostro 5320 Service Manual

Hide thumbs Also See for Vostro 5320:

Table of Contents

Heat sink

Prerequisites

1. Follow the procedure in

NOTE:

The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you

touch it.

CAUTION:

For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The

oils in your skin can reduce the heat transfer capability of the thermal grease.

2. Remove the

base

cover.

NOTE:

Ensure that your computer is in Service Mode. For more information see, step 6 in

computer.

About this task

NOTE:

The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you

touch it.

NOTE:

For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin

can reduce the heat transfer capability of the thermal grease.

The following image(s) indicate the location of the heat sink and provides a visual representation of the removal procedure.

Steps

1. In reverse sequential order (4>3>2>1), loosen the four captive screws (M2x6) that secure the heat sink to the system board.

2. Peel the tape that adheres the display-cable connector latch to the system board.

3. Lift the heat sink off the system board.

Removing and installing components

Before working inside your

computer.

Before working inside your

Table of Contents