Steps
1. Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly.
2. Connect the coin-cell battery cable to the I/O board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the speakers.
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
About this task
The following image(s) indicate the location of the touchpad and provides a visual representation of the removal procedure.
32
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Before working inside your