Wi-Fi - Step 2/7 - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual
Connectivity module
Hide thumbs
Also See for SIMOTICS CONNECT 400:
- Operating instructions manual (156 pages) ,
- Manual (101 pages) ,
- Operating instructions manual (84 pages)
Table of Contents
Advertisement
Commissioning
6.3 Commissioning with iOS
4. Enter the new password again in the "Repeat password" field.
5. Move on to the next step with the "Next" button.
6.3.4.3
Wi-Fi - Step 2/7
Connect the connectivity module to the Wi-Fi network.
Supported Wi-Fi networks
The current version of the SIMOTICS CONNECT 400 connectivity module does not support proxy
server configuration.
The connectivity module encrypts your data according to security standard WPA2. For data
transfer, the connectivity module supports Wi-Fi connections with a frequency of 2.4 GHz
and the Wi-Fi standard 802.11b/g/n. Wi-Fi authentication protocols according to IEEE 802.1X
are not supported.
Procedure
1. The country code is determined automatically. Check that it is correct and modify the country
code, if necessary.
2. With the "Select other network" button, you can display the visible Wi-Fi networks.
3. Select the required Wi-Fi network from the list of visible networks.
4. Enter the Wi-Fi password. The Wi-Fi password must not exceed a maximum length of 32
characters.
82
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL
Advertisement
Table of Contents
