Table of Contents
Advertisement
Figure 23. Removing the expansion unit
7. Lift the expansion unit ( 1 in Figure 23) from the blade-server base unit and lay it on a flat,
static-protective surface.
8. If you are replacing the expansion unit with a new expansion unit, see "Replacing the expansion unit
in a PS704 blade server." If you are removing the expansion unit as part of another procedure, return
to that procedure now.
9. If you are instructed to return the expansion unit, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Replacing the expansion unit in a PS704 blade server
Install a new expansion unit on the PS704 double-wide blade server.
You must have already completed the procedure "Removing the expansion unit for a PS704 blade server"
on page 237.
1. Lift the expansion unit above the blade server base unit and engage the circular pivot bearings onto
the cover pins (as shown by 1 in Figure 24 on page 239) of the base unit.
The expansion unit of the PS704 blade server fits on top of the PS704 base unit, with the DIMM slots
and expansion card slots on top.
238
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Advertisement
Table of Contents
