Table of Contents
Advertisement
Table 23. CA000000 to CA2799FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
Progress code
CA00E1D3
CA00E1D4
CA00E1DC
CA00E1DD
CA00E1F0
CA00E1F1
CA00E1F2
CA00E1F3
Description
Create SCSD block device node (SD)
Create SCSD byte device node (ST)
Dynamic console selection
A graphics adapter has been selected as
the firmware console, but the USB
keyboard is not attached.
Start out-of-box experience
Start self test sequence on one or more
devices
Power on password prompt
Privileged-access password prompt
Action
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Verify the video session and the SOL
session. The console might be redirected to
the video controller.
2. Start a remote control session to see the
status.
3. Go to "Checkout procedure" on page 176.
4. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Verify that there is a USB keyboard
attached to a USB port that is assigned to
the partition.
2. If the problem persists:
a. Go to "Checkout procedure" on page
176.
b. Replace the system-board, as described
in "Replacing the FRU system-board
and chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
Chapter 2. Diagnostics
127
Advertisement
Table of Contents
