hit counter script
IBM 630-6C4 Quick Setup Instructions Manual
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Server
  5. @Server pSeries 630 6C4
  6. Quick setup instructions manual
IBM 630-6C4 Quick Setup Instructions Manual

IBM 630-6C4 Quick Setup Instructions Manual

Eserver
Hide thumbs Also See for 630-6C4:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, User Manual
System Installation
System Installation
Quick Setup Instructions
pSeries 630-6C4
If you have not completed all of the steps in the Quick Setup Instructions labeled
Read Me First, locate the Read Me First Quick Setup Instructions and complete
all of the steps. Then return to this instruction set. The Read Me First Quick Setup
Instructions booklet is located in Box 1 inside the large shipping box that contains
the system drawer.
Read and understand the caution notices found in this booklet. For a
complete listing of all safety notices and other documentation related to
this product, visit the IBM
http://publib16.boulder.ibm.com/pseries/index.htm.
To access the pSeries publications, click Hardware documentation.
If you encounter difficulties while setting
up your system, contact your service
representative for assistance.
Completing Your
Completing Your
You must provide the following items:
One flat-blade screwdriver
pSeries and AIX Information Center at

Advertisement

Table of Contents
loading

Related Manuals for IBM 630-6C4

Summary of Contents for IBM 630-6C4

  • Page 1 Read and understand the caution notices found in this booklet. For a complete listing of all safety notices and other documentation related to this product, visit the IBM pSeries and AIX Information Center at http://publib16.boulder.ibm.com/pseries/index.htm. To access the pSeries publications, click Hardware documentation.
  • Page 2 The Read Me First brochure is located in Contains Licensed Material box 1 of your system over pack. Property of IBM. Copyright IBM and others 2001, 2004 All Rights Reserved. AIX 5L for Mouse (optional) POWER V 5.2 Note: U.S.Government users,...

  • Page 3: Are All Of The Internal Options Installed

    Hardware Management Console Installation and Operations Guide or visit the pSeries and AIX Information Center at http://publib16.boulder.ibm.com/pseries/index.htm. Click hardware documentation. After you complete the HMC installation procedure, return here and complete this step. Your system drawer is equipped with two HMC connectors located on the back of the system.
  • Page 4 Connect the graphic display Connect the graphics display cable to the back of the display and to the graphics adapter connector. To locate installed adapters, consult the "About Your Machine" document. PCI 2D Rear View Graphics Adapter Serial Connector A PCI 2D graphics adapter can be installed in any of the six PCI slots. Some displays require an additional cable.
  • Page 5 Connect the serial and parallel cables Cabling to the serial ports: This system is equipped with two serial connectors identified as serial connector 1. One is located at the front of the system (FS1) and the other (S1) is located at the rear of the system. Use an RJ-48 to 9-pin converter cable to access the front serial connector FS1.

  • Page 6: Connect The Adapter Cables

    Connect the adapter cables If you are not going to install any additional optional adapters, go to step 10. If you are using any optional adapters (such as token ring or 8-port EIA-232), connect the cables to the appropriate adapter connectors in the PCI slots of your system. To locate installed adapters, consult the "About Your Machine"...

  • Page 7: Connect Any Additional External Scsi Devices

    Connect any additional external SCSI devices If you are not going to install any additional external SCSI devices, go to step 12. 11.1 Locate the last SCSI device cabled from the system. Remove the SCSI terminator from the last cabled SCSI device. 11.2 Connect the new SCSI cable to the SCSI connector on the last SCSI device.

  • Page 8: Are You Using An Ethernet Connection

    Are you using the rack-indicator light feature? If you are not connecting a rack-indicator light to your system, go to step 13. The rack-indicator light feature signals when a drawer installed in a rack has a failure or you have issued a locate signal. If you are unsure whether you are using the rack-indicator light feature, ask your system administrator.

  • Page 9: Connect The Power Cable

    Connect the power cable CAUTION: This product is equipped with a three-wire power cable and plug for the user’s safety. Use this power cable with a properly grounded electrical outlet to avoid electrical shock. Note: This system could be equipped with two power supplies, each requiring a separate power cable.
  • Page 10 Connect your power cable to the electrical power source Connect the power cable(s) to the power source. 16.1 Notes: If you are using dc to power your system, you must to have a dc power distribution source. This system could be equipped with two power supplies, each requiring a separate power cable.

  • Page 11: Start Your System

    Start your system Starting your system without an HMC attached 18.1 Press the power-on button on the operator panel. After you press the power-on button located on the operator panel, 18.2 observe the following: 1) The power LED begins to blink visibly faster. 2) The system cooling fans are activated and can be heard accelerating to operating speed.

  • Page 12: Run System Verification

    © International Business Machines Corporation 2004. All rights reserved. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth is GSA ADP Schedule Contract with IBM Corp.

This manual is also suitable for:

P series

Table of Contents