Table of Contents
Advertisement
Route the wire to the associated zone satellite box.
2.
Connect the sensor wire to the appropriate port on the satellite box terminal.
3.
Humidistat
The humidistat is located in the cold aisle humidifier bump out.
You need a Phillips-head screwdriver and a flathead screwdriver for installation.
Removing the humidistat
Press the power button on the outside of the humidifier to power down the humidifier.
1.
Open and danger tag the associated circuit breaker in the ECS cabinet. The circuit breakers are
2.
identified on the panel schedule.
Detach the front panel of the humidistat from the mounting base:
3.
Remove the screw securing the tab in the opening (1), and then slide the tab to the open position (2).
a.
Removal and replacement procedures 35
Advertisement
Table of Contents
