Table of Contents
Advertisement
E15h SPRAYER- Operations: Sprayer
7.1.11 SELECT BETWEEN COVERAGE RATE, ROW WIDTH,
PRESSURE 1 and FAN 1 SPEED
NOTE: To switch between PRESSURE 1 and FAN 1 SPEED, the PRESSURE 1 SENSOR
has to be enabled, ON,(see section 3.31 to set), the FAN 1 SPEED has to have at
least 1 or more Fans selected in Section 3.29). Only the functions enabled will
appear in the FLOW RATE window.
If ALL functions are disabled, then only the COVERAGE RATE and ROW WIDTH will
be displayed in the window.
With COVERAGE RATE displayed:
• Press LINE 2 twice to highlight the COVERAGE RATE window. Only stays
highlighted for 5 seconds.
• Press AUX button with the focus on the COVERAGE RATE window, ROW WIDTH
will be displayed.
• Press AUX button again within 5 seconds, PRESSURE 1 will be displayed.
• Press AUX button again within 5 seconds, FAN 1 SPEED will be displayed in RPM
• Press AUX button again within 5 seconds, COVERAGE RATE will be displayed in
volume/min.
What ever was displayed last will stay on the COVERAGE RATE window.
7.1.12 SELECT BETWEEN FLOW RATE, PUMP SPEED,
AUXILIARY SHAFT SPEED and FAN 2 SPEED
NOTE: To switch between AUXILIARY SHAFT SPEED, PUMP SPEED and FAN 2
SPEED, the AUXILIARY SHAFT SENSOR has to be switched ON,(see section 3.23 to
set), the PUMP SPEED SENSOR has to be switched ON, (see section 3.22). and 2 or
more Fans are selected in Section 3.29). Only the functions enabled will appear in
the FLOW RATE window.
If ALL functions are disabled, then only the FLOW RATE will be displayed in the
window.
With FLOW RATE displayed:
• Press LINE 3 twice to highlight the FLOW RATE window. Only stays highlighted
for 5 seconds.
• Press AUX with the focus on the FLOW RATE window, PUMP SPEED will be
displayed in RPM
• Press AUX again within 5 seconds, AUX SHAFT SPEED will be displayed in RPM
• Press AUX again within 5 seconds, FAN 2 SPEED will be displayed in RPM
• Press AUX again within 5 seconds, FLOW RATE will be displayed in volume/min.
What ever was displayed last will stay on the FLOW RATE window.
V 1.0 11/05
69
- Quick Links:
- Set the Flow Calibration Factor
Hide quick links:
Advertisement
Table of Contents
