Table of Contents
Advertisement
Front I/O and USB Panel Housing Assembly
Description
Front I/O and USB assembly
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Lay the computer on its side with the front facing toward you.
4.
Remove the front bezel
5.
Unplug the three cables that connect the assembly to the system board. The assembly cables
connect to the following system board connectors:
●
F_AUDIO – yellow connector
●
F_USB1 – white connector
6.
Remove the screw (1) that secures the housing to the chassis, and then slide the housing up (2).
Figure 7-37
(Access Panel on page
(Front Bezel on page
Front I/O assembly removal
(Preparation for Disassembly on page
43)
45).
Front I/O and USB Panel Housing Assembly
Spare part number
668572-001
42).
77
Advertisement
Table of Contents
Troubleshooting
