Front I/O And Usb Panel Housing Assembly - HP dx2810 - Microtower PC Service & Reference Manual
Service reference guide: hp compaq dx2810 and dx2818 business pc and dx2810 small form factor business pc
Hide thumbs
Also See for dx2810 - Microtower PC:
- Hardware reference manual (57 pages) ,
- Quickspecs (39 pages) ,
- Product end-of-life disassembly instructions (8 pages)
Table of Contents
Advertisement
Front I/O and USB Panel Housing Assembly
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Lay the computer on its side with the front facing toward you.
4.
Remove the front bezel
5.
Unplug the four cables that connect the assembly to the system board.
6.
Remove the screw (1) that secures the housing to the chassis, slide the housing up (2), and then
pull the assembly away from the chassis while guiding the cables through the hole in the chassis.
To install the housing assembly, reverse the removal procedures.
66
Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
(Preparation for Disassembly on page
(Access Panel on page
(Front Bezel on page
39).
38)
37).
- Quick Links:
- Front Panel Components
Hide quick links:
Advertisement
Table of Contents
