HP Pro 3330 Maintenance And Service Manual page 66
Microtower small form factor
Hide thumbs
Also See for Pro 3330:
- Maintenance & service manual (226 pages) ,
- Illustrated parts & service map (3 pages) ,
- User manual (74 pages)
Table of Contents
Advertisement
8.
To install an expansion card, locate where the card will be seated inside the computer.
Figure 7-13
9.
Hold the card just above the expansion socket on the system board then move the card toward
the rear of the chassis so that the bracket on the card is aligned with the open slot on the rear of
the chassis. Press the card straight down into the expansion socket on the system board.
Figure 7-14
10.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
11.
Reconfigure the computer, if necessary. Refer to
instructions on using Computer Setup.
56
Chapter 7 Removal and Replacement Procedures – Microtower (MT) Chassis
Expansion slot locations
Installing an expansion card — PCIe x16 shown
Computer Setup (F10) Utility on page 7
for
Advertisement
Table of Contents
