Using Computer Setup (F10) Utilities; Computer Setup-File - HP Pro 3330 Maintenance And Service Manual
Microtower small form factor
Hide thumbs
Also See for Pro 3330:
- Maintenance & service manual (226 pages) ,
- Illustrated parts & service map (3 pages) ,
- User manual (74 pages)
Table of Contents
Advertisement
Using Computer Setup (F10) Utilities
Computer Setup can be accessed only by turning the computer on or restarting the system.
To access the Computer Setup Utilities menu, complete the following steps:
1.
Turn on or restart the computer. If you are in Microsoft Windows, click Start > Shut Down >
Restart.
2.
Press either
the bottom of the screen.
Pressing
NOTE:
and again press
3.
If you pressed Esc, press
4.
A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security,
Power, and Advanced.
5.
Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the Computer Setup
Utilities menu, press Esc.
6.
To apply and save changes, select File > Save Changes and Exit.
●
If you have made changes that you do not want applied, select Ignore Changes and Exit.
●
To reset to factory settings or previously saved default settings (some models), select
Apply Defaults and Exit. This option will restore the original factory system defaults.
CAUTION:
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only
after exiting the F10 Setup screen.
Table 3-1
Computer Setup (F10) Utility
Heading
File
Storage
Security
Power
Advanced
Computer Setup—File
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-2
Computer Setup—File
Option
8
Chapter 3 Computer Setup (F10) Utility
Esc
or
F10
while the "Press the ESC key for Startup Menu" message is displayed at
Esc
displays a menu that allows you to access different options available at startup.
If you do not press
Esc
Esc
or
F10
when the monitor light turns green to access the utility.
F10
to enter Computer Setup.
Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup
Description
or
F10
at the appropriate time, you must restart the computer
Table
Computer Setup—File on page 8
Computer Setup—Storage on page 10
Computer Setup—Security on page 12
Computer Setup—Power on page 15
Computer Setup—Advanced on page 16
Advertisement
Table of Contents
