Table of Contents
Advertisement
Appendix
A.3 Data sets
A.3.6
Preset configuration - data set (index) 130
Data set (index) 130 - preset configuration - operator panel
Danger of uncontrolled motor start-up
Can Cause Death, Serious Injury, or Property Damage.
Make sure that the correct preset configuration is set in the new device after the solid-state
overload relay for IO-Link has been replaced.
For additional information on the procedure, please refer to "Parameters (Page 49)".
Note
Bits that are not described in the tables below are reserved and should be ignored.
Note
Sub-indices are not supported.
Table A-5
Data set (index) 130 (target configuration) - operator panel
Byte.Bit
0 ... 17
18.0 ... 18.5
18.6
18.7
19 ... 21
You can find more information on the "Operation at Preset <> Actual Configuration" parameter
1)
for operation with the operator panel in Chapter "Parameter "Operation at Preset <> Actual
Operation" (Page 58)".
You can find more information on the "Operation at Preset <> Actual Configuration" parameter
2)
for operation with the operator panel in Chapter ""Operator panel available" parameter
(Page 58)".
A.3.7
Technology functions - data set (index) 131
Data set (index) 131 - technology functions
Note
Bits that are not described in the tables below are reserved and should be ignored.
124
WARNING
Description
Reserved
Reserved
Operation at Preset <> Actual Configuration
Operator panel available
2)
Reserved
1)
SIRIUS 3RB24 electronic overload relay for IO-Link
Equipment Manual, 07/2022, NEB969165602000/RS-AA/003
Advertisement
Table of Contents
