Siemens SIMOTICS T-1FW6 Series Configuration Manual page 67
Naturally cooled built-in torgue motors for sinamics s120
Hide thumbs
Also See for SIMOTICS T-1FW6 Series:
- Configuration manual (560 pages) ,
- Operating instructions manual (138 pages) ,
- Configuration manual (514 pages)
Table of Contents
Advertisement
Note
We cannot guarantee the composition, nature, state, or quality of non-Siemens products.
Read the detailed text in "Manufacturer recommendations" in the appendix.
Note
General mechanical conditions
Take into account the permissible mechanical speed, limit frequency of the encoder and
Control Unit. When configuring, mounting and adjusting the encoder refer to the appropriate
documentation issued by the manufacturer!
Mechanical integration of the encoder
The mechanical integration of an encoder is defined by certain influencing factors, e.g.:
● The requirements specified by the encoder manufacturer (mounting specifications,
ambient conditions)
● The closed-motor control (commutation) requires an adequately accurate connection
between the motor and encoder without any play
● The closed-loop speed and position control requires that the encoder is integrated into
the mechanical structure with the highest possible stiffness and lowest possible vibration.
● Using the encoder as an angle measuring system for the machine precision requires that
the encoder is connected as close as possible to the process
In addition to selecting a suitable encoder, the performance of the machine axis is essentially
determined by the integration into the overall mechanical system.
As a consequence, a general recommendation for integrating the encoder cannot be given
for all encoder types and axis concepts.
To ensure that the encoder is optimally integrated into the mechanical system, Siemens
offers its Mechatronic Support service, see Catalog. For additional information, please
contact your local Siemens office. You can find the "Technical Support" Internet link in
Chapter "Introduction".
Two options for integrating an encoder are shown as example in the following example.
Naturally cooled 1FW6 built-in torque motors
Configuration Manual, 07/2017, 6SN1197-0AE01-0BP3
Motor components and options
4.1 Motor components
65
Advertisement
Table of Contents
