IBM TotalStorage DS300 Best Practices Manual page 100

Hide thumbs Also See for TotalStorage DS300:

Table of Contents

DS300-1[A]# interface manage eth2[A] info

----[ Interface 'eth2[A]' ]------------------------------------------------

Figure 4-6 iSCSI interface information

3. Assign the IP address of the first iSCSI interface. The interface is called

ETH2. A letter A or B in square brackets specifies the controller to which the

interface belongs. Enter the command interface manage eth2[A] ip

192.168.1.61 and press Enter.

Note: Broadcast address and netmask do not fit right now. This will be

changed in the next steps.

DS300-1[A]# interface manage eth2[A] ip 192.168.1.61

Please wait.

Interface values are now:

Broadcast address: 192.168.1.255

Figure 4-7 Set iSCSI IP interface address

4. Change the subnet mask of the interface ETH2[A] by entering interface

manage eth2[A] netmask 255.255.255.192 and press Enter.

IBM TotalStorage DS300 and DS400 Best Practices Guide

Controller: [A] local

Services: iscsi

Status: Enabled

MAC address: 00:00:D1:DE:1B:70

DHCP DISABLED

IP address: 192.168.1.61

Netmask: 255.255.255.0

Totalstorage ds400