Recommended Fluid Ultratec Special Effects Neutron Haze Fluid / Luminous 7 Haze Fluid: This fluid was specifically designed to be used in our Radiance Haze Machine. This water-based fluid creates an evenly dispersed haze that is dry and long lasting without leaving any residue.
220-240 Volt A.C. 50/60 Hz. 5 Amps. Fluid: Ultratec Special Effects Neutron Water Base Haze Ultratec Special Effects Luminous 7 Water Base Haze Consumption - 27 - 380 cc/ hour (output can be further reduced by using the Interval Timer)
Stand Alone Operation 1. Insert a 2 or 4 Litre Jug of Ultratec Special Effects Neutron or Luminous 7 Haze Fluid into the fluid jug holder. 2. Remove the cap and break the foil seal. Insert the fluid pickup tube into the jug and tighten the lid. Ensure the fluid filter located at the end of the tube sits at the lowest end especially if the machine is not mounted level.
11. An optional Versa Fan can be controlled at the same rate as the internal fan. Plug a matching voltage fan into the U-Ground (120 volt) or Lockable Volex Connector (220-240 volt). It will now vary with the internal fan control. Fan Speed Interval Control...
Warning: Ultratec Special Effects Inc. considers all of it’s product to be safe for use in the application it was intended. Ultratec Special Effects takes no responsibility for misuse or incorrect use. Always refer to the Product Manual for proper use.