Standby Or Hibernation Problems - IBM ThinkPad R40 series Service Manual
Hide thumbs
Also See for ThinkPad R40 series:
- User manual (36 pages) ,
- Troubleshooting manual (108 pages) ,
- Üzemeltetési és hibajavítási kézikönyv (108 pages)
Table of Contents
Advertisement
Solving computer problems
Problem: The PS/2
Solution: Make sure that the TrackPoint and the touch pad are set to
Automatic in the ThinkPad Configuration Program. Then detach the PS/2
Port mouse or the PS/2
the touch pad. If the TrackPoint and the touch pad work, the error might be
due to the PS/2
Make sure that the cable for the PS/2
device is securely connected to ThinkPad Port Replicator, Port Replicator II or
MiniDock.
Note: For more information, see the manual supplied with the mouse.
Problem: The mouse buttons do not work.
Solution: If your ThinkPad computer has the TrackPoint only, this problem
may occur.
Change the mouse driver to Standard PS/2
IBM PS/2 TrackPoint. Drivers are provided in the C:\IBMTOOLS\DRIVERS
directory on your hard disk drive. If your hard disk drive does not contain
device drivers, refer to the ThinkPad Web site. For access to this Web site,
open Access IBM by pressing the Access IBM button.
Standby or hibernation problems
Problem: The computer enters standby mode unexpectedly.
Solution: If the processor reaches a temperature that is too high, the computer
automatically enters standby mode to allow the computer to cool and to
protect the processor and other internal components. Also, check the settings
for standby mode, using Battery MaxiMiser.
Problem: The computer enters standby mode immediately after Power-on
self-test (POST) (the standby indicator light turns on).
Solution: Make sure that:
v The battery is charged.
v The operating temperature is within the acceptable range. Refer to
"Specifications" on page 5.
If these items are correct, have the computer serviced.
Problem: The critical low-battery error message is displayed, and the
computer immediately turns off.
18
®
ThinkPad
R40 Series Service and Troubleshooting Guide
®
Port mouse or the PS/2 pointing device does not work.
®
pointing device, and try using the TrackPoint and
®
Port mouse or the PS/2
®
pointing device.
®
Port mouse or the PS/2
®
Port Mouse, and then reinstall
®
®
pointing
Advertisement
Table of Contents
