Table of Contents
Advertisement
of paper. You can empty the printer buffer by printing out the data that is stored in
the flash memory. The data prints on the customer receipt station. The data in the
buffer is erased only after the last line of data is printed.
Note: If the SureMark has the 2 MB option installed, up to three rolls of paper
You can upload an electronic journal while in Model 4 emulation mode. See
Appendix E, "Uploading electronic journal data," on page 187 for detailed
information.
Printing buffer data on thermal/impact printers
To print the buffer data from the beginning:
1. Press and hold both buttons. When the printer ready indicator begins blinking,
2. Press and release both buttons again.
Notes:
1. If the SureMark printer encounters an error (for example, the paper runs out or
2. To stop printing the data, open and close the ribbon cover. When you are ready
3. To stop printing and restart at the current position, open and close the paper
Printing buffer data on single-station printers
To print the buffer data from the beginning:
1. Open the top cover. The LED will flash quickly.
2. Press and hold the paper feed button for 5 seconds.
3. The LED will show one short blink, accompanied by a beep, followed by a 1
4. Press and hold the paper feed button for 5 seconds.
5. The LED will change to a long blink. The beeper will sound continuously.
6. Close the cover to begin printing the electronic journal data.
Notes:
1. If the SureMark printer encounters an error (for example, the paper runs out or
2. To stop printing the data, open the top cover, turn the printer power switch OFF,
3. To stop printing and restart at the current position, open and close the top cover.
4. To return the printer to normal mode, press and release the paper feed button a
42
SureMark Printers User's Guide
might be needed to print all the electronic journal data.
release both buttons.
the cover is opened) while printing the data, the data remains intact.
to print the data, use the procedure above to restart printing from the beginning.
cover. Printing immediately restarts.
Note: The paper feed button is the small button next to the LED.
second pause.
the cover is opened) while printing the data, the data remains intact.
turn the printer power switch back ON, and close the top cover. When you are
ready to print the data, use the procedure above to restart printing from the
beginning.
Printing immediately restarts.
third time before closing the top cover.
Updated April 2, 2009
Advertisement
Table of Contents
