Table of Contents
Advertisement
Installing the cover (tower)
Note: The illustrations in this document might differ slightly from your hardware.
Left-side cover
To install the server left-side cover:
1. Align the cover with the left side of the server, approximately 25 mm (1 inch)
from the front of the server; place the bottom of the cover on the bottom rail of
the chassis.
2. Insert the tabs at the top of the cover into the slots at the top of the server.
3. Hold the cover against the server, and slide the cover toward the front of the
server until the cover clicks into place.
Installing the bezel and door (tower)
Note: The illustrations in this document might differ slightly from your hardware.
To install the bezel:
1. Place the tabs at the bottom edge of the bezel in the slots at the bottom front of
the server.
Slots
Bezel
Door
Flange
83
Installing options
Advertisement
Table of Contents
