Table of Contents
Advertisement
Speaker
Description
Speaker (includes cable)
Before removing the speaker, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the any smart cards and memory cards.
5.
Remove the bottom cover (see
6.
Remove the battery (see
7.
Remove the memory modules (see
8.
Remove the ODD (see
9.
Remove the SSDs (see
10.
Remove the middle cover (see
11.
Remove the fans (see
12.
Remove the system board (see
Remove the speaker:
1.
Remove the 3 Phillips M2.0×2.5 screws (1) that secure the speaker to the computer.
Service door on page
Battery on page
43).
Memory modules on page
ODD on page
48).
Solid-state drive (SSD) on page
Middle cover on page
Fans on page
70).
System board on page
41).
51).
46).
61).
72).
Component replacement procedures
Spare part number
L28477-001
79
- Quick Links:
- Locating Hardware
- Solid-State Drive (Ssd)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
