Table of Contents
Advertisement
Speaker
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the speaker cable from the clip on the base pan.
4.
Disconnect the speaker wire from the system board connector labeled SPKR (1).
5.
From the inside of the chassis, remove the silver Torx T15 screw (2) that secures the speaker to the
chassis.
6.
Remove the speaker from the chassis (3).
To replace the speaker, reverse the removal procedures.
(Preparation for disassembly on page
(Access panel on page
21).
20).
Speaker
47
Advertisement
Table of Contents
