Com Module Selection; Wi-Fi; Network Time - Miele PWM 908 Operating And Installation Instructions
Hide thumbs
Also See for PWM 908:
- Operating and installation instructions (104 pages) ,
- Operating and installation instructions (100 pages) ,
- Operating and installation instructions (100 pages)
Table of Contents
Advertisement
Supervisor level
COM module selection
Your washing machine is equipped
with an integrated Wi-Fi module.
However, the machine can also be
fitted with an external module.
– Off
– Internal module (factory setting)
The internal Wi-Fi module is used.
– External module
An XKM module or RS232 module is
inserted into the module slot.
Wi-Fi
Control the networking of your
washing machine.
– Setup
This message only appears if the
washing machine has not yet been
connected to a Wi-Fi network.
– Deactivate (visible when the network
is activated)
The network remains set up, the Wi-
Fi function is switched off.
– Activate (visible if the network is
deactivated)
The Wi-Fi function is reactivated.
– Connection status (visible when the
network is activated)
– the quality of Wi-Fi reception
– the network name
– the IP address
– New setup (visible if set up)
94
Resets the Wi-Fi login (network) to
immediately re-establish a new
connection.
– Reset (visible if set up)
The network is no longer set up. To
use the network again, a new
connection must be established.
– The Wi-Fi is switched off.
– The Wi-Fi connection will be reset
to the factory default setting.
Network time
The date and time can be
synchronised via the network.
– Off
The date and time are not
synchronised via the network.
– as a master
The machines are in a network but
are not connected to the internet.
One machine is declared as the
master and sends data to the slave
devices.
– as a slave
The machines are in a network with
internet connection. All machines are
configured as slaves. Data is
synchronised over the Internet.
- Quick Links:
- A Fault Message Appears in the...
Hide quick links:
Advertisement
Table of Contents
