Supervisor level
"Display" off status
The display switches off to save
energy. The Start/Stop sensor flashes
slowly.
Changing this setting leads to increased
energy consumption.
Off
The display does not switch off.
On (10 min.) Not curr.prog.
The display will remain on while the
programme is running but will go out
10 minutes after the end of the
programme.
Logo (10 min.) Not curr.prog.
The display stays switched on while the
programme is running. The logo lights
up 10 minutes after the end of the
programme.
On after 10 min.
The display will go out after 10 minutes.
On (30 min.) Not curr.prog.
The display will remain on while the
programme is running but will go out
30 minutes after the end of the
programme.
Logo (30 min.) Not curr.prog.
The display stays switched on while the
programme is running. The logo lights
up 30 minutes after the end of the
programme.
On after 30 min.
The display will go out after 30 minutes.
86
"Machine" off status
In order to save energy, the washing
machine will switch off automatically
after the end of the programme or if no
further selection is made. This can be
changed.
Changing this setting leads to increased
energy consumption.
– not switching off
– switching off after 15 minutes (factory
default)
– switching off after 20 minutes
– switching off after 30 minutes
Delay start
The delay start (Timer) display can be
switched on or off.
Factory setting: On
Memory
The washing machine will save the
latest settings (temperature, spin
speed and some of the options) which
have been selected for a programme
after the programme has started.
When the programme is selected again,
the saved settings will appear in the
display.
Factory setting: Off