Refitting The Transit Bars; Aligning The Washing Machine - Miele PWM 908 Operating And Installation Instructions
Hide thumbs
Also See for PWM 908:
- Operating and installation instructions (104 pages) ,
- Operating and installation instructions (100 pages) ,
- Operating and installation instructions (108 pages)
Table of Contents
Advertisement
Installation
Secure the transit bars to the back of
the washing machine.
Useful tip: Make sure that the holes
are fitted over the retainers .
Risk of damage from incorrect
transport.
The washing machine may be
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the machine is to be
transported (e.g. when moving
house).
Refitting the transit bars
Refitting is carried out by reversing the
procedure.
76
Aligning the washing machine
The washing machine must stand
perfectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
for levelling the washing machine. All
four feet are screwed in when the
appliance is delivered.
Using the spanner supplied, turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.
- Quick Links:
- A Fault Message Appears in the...
Hide quick links:
Advertisement
Table of Contents
