Table of Contents
Advertisement
3. Hang the hooks of the front of the outer rail onto the slots on the front of the rack. If necessary, use
screws to secure the outer rails to the rack, as shown in the following figure.
Figure 14. Securing the outer rail to the rack with screws
4. Pull out the rear of the outer rail, adjusting the length until it fits within the posts of the rack, as
shown in the following figure.
Figure 15. Extending the outer rail to reach the rear posts of the rack
5. Hang the hooks of the rear portion of the outer rail onto the slots on the rear of the rack. If necessary,
use screws to secure the rear of the outer rail to the rear of the rack.
6. Repeat these steps for the remaining outer rail.
Install the appliance into a rack
1. Confirm that the inner rails are properly installed on the appliance.
2. Confirm that the outer rails are correctly installed on the rack.
3. Pull the middle rail out from the front of the outer rail and make sure that the ball-bearing shuttle is
at the front locking position of the middle rail.
12
IBM Cloud Object Storage System: Slicestor 2212 Appliance Manual 3409-S00/3401-S00/3403-S00
Hide quick links:
Advertisement
Table of Contents
