Advertisement
Quick Links
Data Projector
DATE: March 30, 2015
MODEL:
VPL-F720HZL
VPL-F725HZL
VPL-FHZ700L
SERIAL NO:
ALL
Italicized information in green applies to
customers outside the United States.
DPPJ15-016
B-DPPJ15-016-0.FM
Video Products
Technical Bulletin 30-2015-044
SUBJECT: HOW TO INSTALL AND REMOVE OPTIONAL
LENS
DESCRIPTION
This bulletin provides instructions on how to install and remove
the optional lens. The instructions are attached from pages 2–10.
CAUTION:
Installation and removal of the optical lens must be
performed ONLY by service personnel properly trained and
thoroughly knowledgeable on safe handling of laser-emitting
equipment.
NOTE:
•
The instructions are extracted from the following service
manual:
VPL-FHZ700L, VPL-F725HZL, VPL-F720HZL Service
Manual, 1
st
Removal of Optional Lens."
•
The instructions are not included in the operation manual.
•
Only the following optical lenses with laser certification can
be installed:
VPLL-FM22
VPLL-ZM42
ZPLL-ZM102
VPLL-Z4007
VPLL-Z4008
VPLL-Z4011
VPLL-Z4015
VPLL-Z4019
VPLL-Z4025
VPLL-Z4045
Video Products Technical Bulletin 30-2015-044
Edition (Revised 1), Section 1-7, "Installation/
Page 1 of 10
Advertisement
Related Manuals for Sony VPL-F720HZL
Summary of Contents for Sony VPL-F720HZL
- Page 1 United States. equipment. NOTE: • The instructions are extracted from the following service manual: VPL-FHZ700L, VPL-F725HZL, VPL-F720HZL Service Manual, 1 Edition (Revised 1), Section 1-7, “Installation/ Removal of Optional Lens.” • The instructions are not included in the operation manual.
- Page 2 1-7. Installation/Removal of Optional Lens . Be careful not to drop the lens. . Do not touch the lens portion with your hands. . Do not work with this unit suspended from the ceiling. 1-7-1. Work Flow Perform the installation and removal of the optional lens according to the following work fl ow. .
- Page 3 1-7-3. Removal of Back Correction Glass Assembly When attaching the optional lens VPLL-ZM42/Z4011, remove the back correction glass assembly from the lens mounting portion of this unit. Back correction glass assembly When removing the back correction glass assembly, rotate it in the direction of the arrow A so that the mark of the back correction glass assembly is aligned with the mark of the lens adjustment adaptor.
- Page 4 1-7-4. Installation of Lens Adaptor When attaching the optional lens VPLL-ZM42, the lens adaptor PK-F500LA2 is required. 1. Insert the lens into the lens adaptor. PK-F500LA2 2. Secure the lens with the four screws. Screws Screws Move the lens until there is no gap. 1-37 (E) VPL-FHZ700L...
-
Page 5: Installation
1-7-5. Installation/Removal of Optional Lens Installation 1. Remove the lens door. (Refer to steps 1 to 3 in Section 1-6-2.) 2. Temporarily attach the four screws (with stoppers) (supplied with the unit) to the lens. Screws (with stoppers) Flange portion (supplied with the unit) Screws (with stoppers) (supplied with the unit) - Page 6 1-7-6. Focus Adjustment of Peripheral Area When attaching the optional lens VPLL-Z4007 to this unit, in addition to performing the adjustment of screen focus, also perform the focus adjustment of the peripheral area. 1. Project the image and adjust the screen size using the zoom lever. Zoom lever 2.
- Page 7 If the peripheral area is out of focus Depending on the installation condition, the focus of the peripheral area of screen cannot be adjusted using the peripheral focus ring. In such a case, perform the adjustment by changing the number of spacers inside of the adaptor.
- Page 8 3. Remove the two screws from the spacer attached inside of the adaptor. Adaptor Spacer Screws 4. Add or remove a spacer according to the focus status of the peripheral area of screen. When removing or attaching the spacer, handle it with extreme care not to cut your hands with it. A spacer is supplied with the optional lens as a spare part.
- Page 9 If the focus moves away from Just Focus when you rotate the peripheral focus ring in the clockwise direction as far as it will go, remove a spacer. Spacer 5. Secure the spacer with the two screws. Screws 1-42 (E) VPL-FHZ700L...
- Page 10 6. Attach the adaptor to the lens, then secure it with the six screws. Align the connector portion of the adaptor so that it is located as shown in the illustration with respect to the spring of the lens, then securely insert the adaptor to the lens. Screws Adaptor Connector portion...