Table of Contents
Advertisement
Display mode
Display mode allows the user to select the manner in which
text is displayed.
• "Normal" displays black text on a white background.
• "Inverse" displays white text on a black background.
For details of selecting this function see Initial Set-up
(Page 18)
6.7
I/O Editor
Overview
The I/O Editor allows the user to configure the digital and analog inputs and outputs of the
converter.
An example of how the configuration of the inputs and outputs is given in the procedure
below. It should be noted that the following screens are for demonsration purposes only and
the actual screens may vary depending upon the type and firmware of the converter that is
being used.
Changing pre-assigned input and output settings
Some inputs and outputs may already be assigned a function, it is recommended that these
assigments are not changed, unless it is required for a particular type of application.
If the pre-assigned inputs/outputs are changed, it is essential that the application is
checked to ensure it will function correctly and as expected.
Removal of the ON/OFF command
If removing the ON/OFF command from a digital input (p0840), the indice will be changed
to 1, thereby resetting this parameter.
This will make the ON/OFF function of the converter not operate correctly, or as anticipated
by the user.
Please ensure that during the commissioning of the converter the ON/OFF command
functions properly and as expected for your specific applicatioin.
Intelligent Operator Panel (IOP)
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
CAUTION
CAUTION
Menu
6.7 I/O Editor
85
- Quick Links:
- Introduction
- Layout and Functions
- Initial Set-Up
- Diagnostics
- Parameters
Hide quick links:
Advertisement
Table of Contents
