Observe the procedures described in these operating instructions. Claims of any kind for damage resulting from unintended use, incompetent repairs, unauthorised modifi cation or the use of unauthorised spare parts will not be accepted. The operator alone bears liability. SDB 2400 A1...
After every use, before cleaning and when refi lling ► with mains water, always remove the plug from the mains power socket. Do not use extension cables. ► Never touch the power cable or the plug with ► wet hands. SDB 2400 A1...
Page 6
Under NO circumstance should you use the ► appliance if it shows visible signs of damage, has fallen or leaks water. Arrange for it to be repaired by qualifi ed specialists. Always disconnect the plug from the mains power ► socket after use. SDB 2400 A1...
Page 7
► switched on or cooling down, be kept out of the reach of children who are younger than 8 years old. Discontinue use of the appliance if the anti-kink ► protection on the power cable is damaged! SDB 2400 A1...
Page 8
Should care instructions not be given or known, start with the lowest temperature setting. The iron must be used and parked on a stable ► surface. When you want to put the steam iron down, ► place it only on its stand. SDB 2400 A1...
Check the contents to ensure everything is present and for signs of visible damage. ► If the delivery is not complete, or is damaged due to defective packaging or through transportation, contact the Service Hotline (see chapter Service). SDB 2400 A1...
3 Button for steam blast 4 Control lamp “Temperature” 5 Control lamp “Power” 6 Appliance base 7 Temperature regulator 8 Button Self Clean 9 Sole of the iron 0 Water jet q Filler opening for the water tank w Measuring beaker SDB 2400 A1...
Otherwise, the jets for the steam blast function could calcify (become blocked) prematurely. To extend the optimal steam blast function, mix mains water with distilled water as per the following table. SDB 2400 A1...
Check the care instructions on the labels in the garment to see if it is suitable for being ironed, and at which temperature setting. Temperature Regu- Type of Material lator Symbol7 Synthetic Silk, Wool Cotton, Linen Linen SDB 2400 A1...
The steam blast is especially suitable for smoothing diffi cult to reach parts of a garment. The temperature regulator 7 must be in the red marked setting range at the least in order to produce a steam blast. Slightly raise the steam iron.. Press the steam blast button SDB 2400 A1...
Stand the steam iron only on the appliance base Taking the steam iron out of service Disconnect the plug from the mains power socket. Empty the water tank and clean the sole of the iron Stand the steam iron only on the appliance base SDB 2400 A1...
9. To do this, pass the sole plate 9 a few times back Clean the soleplate and forth over a towel or piece of old cloth. Allow the steam iron to cool down before putting it to one side. SDB 2400 A1...
NOTICE ► Do not use the safety switch-off intentionally to take the iron out of service! The safety switch-off is for emergencies only, should the instructions for closing down be forgotten! SDB 2400 A1...
There is not enough water in It will not produce steam. Fill the water tank with water.. the water tank. Set the temperature regulator 7 The set temperature is too low for steam generation. to at least level or higher. SDB 2400 A1...
Electromagnetic Compatibility Directive 2004/108/EC as well as the Directive for Low Voltage appliances 2006/95/EC. The complete original declaration of conformity can be obtained from the importer. Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY www.kompernass.com SDB 2400 A1...
Repairs carried out after lapse of the warranty period are subject to charge. Service Service Great Britain Tel.: 0871 5000 720 (£ 0.10/Min.) E-Mail: kompernass@lidl.co.uk IAN 66493 Service Ireland Tel.: 1890 930 034 (0,08 EUR/Min., (peak)) (0,06 EUR/Min., (off peak)) E-Mail: kompernass@lidl.ie IAN 66493 SDB 2400 A1...