Commissioning; Commissioning Guidelines - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage converters built-in and wall mounting units with cu230p-2 control units

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Commissioning

Converter with the CU230P-2 Control Units

Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE

1. Define the requirements to be met

by the drive for your application.

2. Restore the factory settings of the

inverter if necessary.

3. Check if the factory setting of the

inverter is sufficient for your

application.

4. Set the following for quick

commissioning of the drive:

– The closed-loop motor control

– The inputs and outputs

– The fieldbus interface

5. Check if additional inverter

functions are required for the

application.

6. If necessary, adapt the drive.

7. Save your settings.

Show Quick Links

Table of Contents

Sinamics g120p