Inserting And Removing The Mmc - Siemens SINAMICS G120 Operating Instructions Manual
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Commissioning (software)
5.7 Commissioning modes
5.7.4.3
Inserting and removing the MMC
Inserting the MMC
To insert an MMC into the Control Unit of the inverter, the process shown in the figure below
should be performed.
Figure 5-10
Warning
When inserting an MMC during operation Alarm A0564 appears if P8458 is set to 0. This is a
hint that with P8456 = 0 no automatic download will be performed at startup.
If the MMC is inserted to perform an upload this alarm can be quitted without any further
action.
If the MMC is inserted to perform an automatic download P8456 must be set accordingly.
5-50
Installing the MultiMedia Card (MMC)
Operating Instructions, 11/2006, A5E00766042B AA
Control Units CU240S
- Quick Links:
- Parameters
- Faults and Alarms
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
