Table of Contents
Advertisement
Menu system
AF (Alternative Frequency)
When poor reception is experienced,
automatically switch to another frequency
broadcasting the same program in the same RDS
network with better reception.
Display
Setting
"AF ON"
The AF function is ON.
"AF OFF"
The AF function is OFF.
When the AF function is ON, the "RDS" indicator
is ON.
• When no other stations with stronger reception are
available for the same program in the RDS network,
you may hear the incoming broadcast in bits and
snatches. Turn OFF the AF function in such a case.
Restricting RDS Region (Region
Restrict Function)
You can choose whether or not to restrict the
RDS channels, received with the AF function for a
particular network, to a specific region.
Display
Setting
"REG ON"
The Region Restrict Function is ON.
"REG OFF"
The Region Restrict Function is OFF.
• Without restricting AF function to the specified region
and network, it sets up to search the station with
good reception in the same RDS network.
Auto TP Seek
When the TI function is ON and poor reception
conditions are experienced when listening to
a traffic information station, another traffic
information station with better reception will be
searched for automatically.
Display
Setting
"ATPS ON"
The Auto TP Seek Function is ON.
"ATPS OFF"
The Auto TP Seek Function is OFF.
28
|
English
In FM reception
Monaural Reception
Noise can be reduced when stereo broadcasts are
received as monaural.
Display
Setting
"MONO OFF"
The monaural reception is OFF.
"MONO ON"
The monaural reception is ON.
External Display Control
Switch the display of the External Display
connected to this unit.
Display
"OEM DISP"
Each time the knob is pushed to [4] or [¢],
the display switches.
Auxiliary Input Display Setting &
Disc Naming
For selecting the display when switched to
Auxiliary input source. For the Disc Naming refer
to the <Disc Naming (DNPS)> (page 23).
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX EXT" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Auxiliary input display setting mode
Push the Control knob to [FM] or [AM].
Select the "NAME SET" display.
4
Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
5
Select the Auxiliary input display
Push the Control knob to [4] or [¢].
Each time the button is pressed, the display
switches as shown below.
Hide quick links:
Advertisement
Table of Contents
