Table of Contents
Advertisement
Quick Links
HP StoreEasy 3000 Storage Administrator
Guide
This document describes how to install, configure, and maintain all models of HP StoreEasy 3000 Storage and is intended for
system administrators. For the latest version of this guide, go to http://www.hp.com/support/StoreEasy3000Manuals.
HP Part Number: B7D88-96142
Published: April 2014
Edition: 3
Advertisement
Table of Contents
Related Manuals for HP storeeasy 3000
Summary of Contents for HP storeeasy 3000
- Page 1 HP StoreEasy 3000 Storage Administrator Guide This document describes how to install, configure, and maintain all models of HP StoreEasy 3000 Storage and is intended for system administrators. For the latest version of this guide, go to http://www.hp.com/support/StoreEasy3000Manuals. HP Part Number: B7D88-96142...
- Page 2 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 3: Table Of Contents
1 HP StoreEasy 3000 Storage.................8 Features..........................8 Hardware components......................8 HP StoreEasy 38x0 Gateway Storage hardware components.............8 HP StoreEasy 38x0 Gateway Storage Blade hardware components..........11 Drive LED definitions......................12 Systems Insight Display LED combinations................13 Software components......................14 2 Installing and configuring the storage system..........15 Setup overview........................15... - Page 4 Adding storage.........................37 Expanding storage......................37 Extending storage using Windows Storage Utilities............37 Extend volumes using Disk Management..............37 Expanding storage for EVA arrays using HP P6000 Command View........38 Expanding storage using the Array Configuration Utility.............38 Expand logical drive....................38 Volume shadow copies......................38 Shadow copy planning......................39 Identifying the volume....................39...
- Page 5 Comparing administrative (hidden) and standard shares............56 Managing shares......................56 File Server Resource Manager....................56 Quota management......................57 File screening management....................57 Storage reports........................57 6 Cluster administration................58 Cluster overview........................58 Cluster terms and components....................58 Nodes..........................58 Resources.........................59 Cluster groups........................59 Virtual servers........................59 Failover and failback......................59 Quorum disk........................60 Cluster concepts........................60 Sequence of events for cluster resources................61 Hierarchy of cluster resource components................61 Cluster planning........................62...
- Page 6 Starting the System Management Homepage application............76 System Management Homepage main page.................77 Certificate of Authenticity......................79 Known issues.........................79 Error codes..........................83 HP Insight Management CSP WBEM Providers for Windows error codes........83 HP Support websites.......................84 Autonomy LiveVault.........................85 Microsoft Systems Center Operations Manager................85 Removing and replacing hardware components................85 8 Storage system recovery................86...
- Page 7 Warranty information......................96 Glossary....................98 Index.......................100 Contents...
-
Page 8: Hp Storeeasy 3000 Storage
This section provides illustrations of the storage system hardware components. HP StoreEasy 38x0 Gateway Storage hardware components The following figures show components and LEDs located on the front and rear panels of the HP StoreEasy 38x0 Gateway Storage. Figure 1 HP StoreEasy 38x0 Gateway Storage front panel components 1. - Page 9 Figure 2 HP StoreEasy 38x0 Gateway Storage front panel LEDs and buttons Item Description Status NIC status LED Off = No network link Solid green = Link to network Flashing green = Network activity System health LED Green = Normal...
- Page 10 8. Video connector 9. iLO connector 10. Serial connector 1 1. FlexibleLOM ports (Shown: 4x1Gb/Optional: 2x10Gb); port 1 on right side Figure 4 HP StoreEasy 38x0 Gateway Storage rear panel LEDs and buttons Item Description Status UID LED/button Blue = Activated.
-
Page 11: Hp Storeeasy 38X0 Gateway Storage Blade Hardware Components
Off = No link exists HP StoreEasy 38x0 Gateway Storage Blade hardware components The following figures show components and LEDs located on the front and rear panels of the HP StoreEasy 38x0 Gateway Storage Blade. Figure 5 HP StoreEasy 38x0 Gateway Storage Blade front panel components 1. -
Page 12: Drive Led Definitions
3840 Gateway Storage Blade: ProLiant BL460c Gen8 The ProLiant documentation is available at: http://www.hp.com/go/proliantgen8/docs Drive LED definitions The following figure shows the drive LEDs. These LEDs are located on all HP ProLiant hot plug hard drives. Figure 7 Drive LEDs Item... -
Page 13: Systems Insight Display Led Combinations
Item Status Definition Removing the drive does not cause a logical drive to fail. Drive status Solid green The drive is a member of one or more logical drives. Flashing green The drive is rebuilding or performing a RAID migration, stripe size migration, capacity expansion, or logical drive extension, or is erasing. -
Page 14: Software Components
Windows Storage Server 2012 or 2012 R2 Standard Edition comes preinstalled and activated on the HP StoreEasy 3830 Storage. Windows Storage Server 2012 R2 Standard Edition comes preinstalled and activated on HP StoreEasy 3840 Storage. The storage system configuration also includes the HP Initial Configuration Tasks window, Windows Server Manager, and HP StoreEasy tools, which are used to set up and manage your storage system. -
Page 15: Installing And Configuring The Storage System
2 Installing and configuring the storage system Setup overview The HP StoreEasy 3840 Storage comes preinstalled with the Microsoft Windows Storage Server 2012 R2 Standard Edition operating system with Microsoft iSCSI Software Target and a Microsoft Cluster Service (MSCS) license included. -
Page 16: Connect To The Storage System
Using the default user information provided on the iLO Network Settings tag, log on to iLO, and then launch a remote console to the storage system. For detailed instructions on using iLO remote management software, see the HP iLO 4 User Guide. -
Page 17: Configure The Storage System
For more information on any of these tasks, click the help button for the respective task group in the ICT window. NOTE: Microsoft Storage Spaces are not supported on HP StoreEasy 3000 Storage. Register SMI-S provider (cluster configuration) If no provider is registered, register the SMI-S provider using the registration tool. You are prompted for the IP address of the array and registration credentials. -
Page 18: Multi-Path I/O Configuration
HP StoreEasy 3000 Storage products are NAS gateway products that provide file services for SAN or array block storage. By presenting LUNs from the SAN or array to the HP StoreEasy 3000 Storage, you can offer SMB and NFS file shares to clients. This also enables other Windows based features such as snapshots (volume shadow copies), data deduplication, directory quotas and much more. -
Page 19: Provisioning Storage
HP StoreEasy 3000 Storage products are NAS gateway products that provide file services for SAN or array block storage. By presenting LUNs from the SAN or array to the HP StoreEasy 3000 Storage, you can offer SMB and NFS file shares to clients. This also enables other Windows based... -
Page 20: Complete System Configuration
NOTE: Microsoft Storage Spaces are not supported with StoreEasy products. All storage provisioning for HP StoreEasy 3000 Storage is done on the particular array used for storage. Consult the documentation for your particular array to perform the necessary tasks involved in presenting LUNs to the HP StoreEasy 3000 Storage. -
Page 21: Adding A Node To An Existing Cluster
(server IP address or hostname). When finished, the new node is added to the cluster. All nodes can be joined to the cluster simultaneously. HP recommends that you add a single node at a time verifying cluster operation with each node addition. Cluster validation must also be run when each node is added. -
Page 22: Using Server Core
10. Verify that the cluster resources can perform failover: Under Navigate in the main viewing pane, click Roles. Verify that a file server is listed (if not, create one). Right-click the file server name and select Move. There are two move options: Best Possible Node and Select Node. -
Page 23: Configuring Failover Properties For Multi-Site Environments
PS C:\Users\Administrator>dism /online /enable-feature /featurename:OEM-Appliance-OOBE Then, install HP ICT from C:\hpnas\Components\ManagementTools. Configuring failover properties for multi-site environments You can configure failover properties for multi-site environments using DFS Management, which is available from the Tools menu in Windows Server Manager (Tools→DFS Management). -
Page 24: Administration Tools
Windows Server Manager can be launched from the storage system desktop by clicking the icon on the left end of the task bar. The local HP StoreEasy Storage system as well as other Windows servers may be managed, as described in the... -
Page 25: Data Deduplication
Administrators can use the File and Storage Services role to setup and manage multiple file servers and their storage by using Server Manager or Windows PowerShell. Some of the specific applications include the following: Use Data Deduplication to reduce the disk space requirements of your files, saving money on storage. -
Page 26: Print Management
UNIX, Linux, or Mac OS operating systems. NFS is supported on all HP StoreEasy 3000 Storage systems. All of the following types of NFS account mapping are supported: Active Directory® Domain Services (AD DS) mapped user access, Active Directory®... -
Page 27: Storage Management Overview
4 Storage management overview This chapter provides an overview of some of the components that make up the storage structure of the storage system. Storage management elements Storage is divided into four major divisions: Physical storage elements Logical storage elements File system elements File sharing elements Each of these elements is composed of the previous level's elements. -
Page 28: Physical Storage Elements
Figure 8 Storage management process example Physical storage elements The lowest level of storage management occurs at the physical drive level. Minimally, choosing the best disk carving strategy includes the following policies: Analyze current corporate and departmental structure. Analyze the current file server structure and environment. Plan properly to ensure the best configuration and use of storage. -
Page 29: Arrays
To protect against data loss from hard drive failure, storage systems should be configured with fault tolerance. HP recommends adhering to RAID 5 configurations. The table below summarizes the important features of the different kinds of RAID supported by the Smart Array controllers. -
Page 30: Online Spares
Table 2 Summary of RAID methods RAID 0 Striping RAID 1+0 RAID 5 RAID 6 (ADG) (no fault Mirroring Distributed Data tolerance) Guarding Maximum number of hard Storage system dependent drives Tolerant of single hard drive failure? Tolerant of multiple If the failed Yes (two drives can fail) simultaneous hard drive... -
Page 31: Partitions
span multiple LUNs. You can use the Windows Disk Management utility to convert disks to dynamic and back to basic and to manage the volumes residing on dynamic disks. Other options include the ability to delete, extend, mirror, and repair these elements. Partitions Partitions exist as either primary partitions or extended partitions. -
Page 32: File Sharing Elements
NTFS. Clustered server elements HP StoreEasy 3000 Storage systems supports clustering. These storage systems support several file sharing protocols including DFS, NFS, FTP, HTTP, and Microsoft SMB. Only NFS, FTP, and Microsoft SMB are cluster-aware protocols. HTTP can be installed on each node but the protocols cannot be set up through cluster administrator, and they will not fail over during a node failure. -
Page 33: Management Tools
HP Systems Insight Manager HP SIM is a web-based application that allows system administrators to accomplish normal administrative tasks from any remote location, using a web browser. HP SIM provides device management capabilities that consolidate and integrate management data from HP and third-party devices. -
Page 34: File Server Management
Click Start and then click ↓. Select HP System Tools→HP Array Configuration Utility. If the Execution Mode for ACU is set to Remote Mode, log on to the HP System Management Homepage. The default user name is Administrator and the password is the Windows Storage Server 2012 or 2012 R2 administrator password that is set by the storage system administrator. -
Page 35: Disk Management Utility
This is a reserved volume and must be maintained as it exists. HP does not recommend spanning array controllers with dynamic volumes. The use of software RAID-based dynamic volumes is not recommended. Use the array controller instead; it is more efficient. -
Page 36: Scheduling Defragmentation
Only basic disks can be formatted as FAT or FAT32. Read the online Disk Management help found in the utility. Scheduling defragmentation Defragmentation is the process of analyzing local volumes and consolidating fragmented files and folders so that each occupies a single, contiguous space on the volume. This improves file system performance. -
Page 37: Adding Storage
For more information about RAID levels, see the Smart Array Controller User Guide, or the document titled Assessing RAID ADG vs. RAID 5 vs. RAID 1+0. Both are available at the Smart Array controller web page or at http://h18000.www1.hp.com/products/servers/proliantstorage/arraycontrollers/ documentation.html. Extend volumes using Disk Management The Disk Management snap-in provides management of hard disks, volumes or partitions. -
Page 38: Expanding Storage For Eva Arrays Using Hp P6000 Command View
If you choose host presentation during virtual disk creation, the management agent cannot complete any other task until that virtual disk is created and presented. Therefore, HP recommends that you wait until a virtual disk is created before presenting it to a host. -
Page 39: Shadow Copy Planning
Shadow copy planning Before setup is initiated on the server and the client interface is made available to end users, consider the following: From what volume will shadow copies be taken? How much disk space should be allocated for shadow copies? Will separate disks be used to store shadow copies? How frequently will shadow copies be made? Identifying the volume... -
Page 40: Identifying The Storage Area
volume instead of the source volume. Remember that when the storage limit is reached, older versions of the shadow copies are deleted and cannot be restored. CAUTION: To change the storage volume, shadow copies must be deleted. The existing file change history that is kept on the original storage volume is lost. -
Page 41: Managing Shadow Copies
and shadow copies are enabled on it, users cannot access the shadow copies if they traverse from the host volume (where the mount point is stored) to the mounted drive. For example, assume there is a folder F:\data\users, and the Users folder is a mount point for G:\. - Page 42 Figure 13 Shadow copies stored on a source volume The cache file location can be altered to reside on a dedicated volume separate from the volumes containing files shares. (See Figure 14 (page 42)). Figure 14 Shadow copies stored on a separate volume The main advantage to storing shadow copies on a separate volume is ease of management and performance.
-
Page 43: Enabling And Creating Shadow Copies
Enabling and creating shadow copies Enabling shadow copies on a volume automatically results in several actions: Creates a shadow copy of the selected volume. Sets the maximum storage space for the shadow copies. Schedules shadow copies to be made at 7 a.m. and 12 noon on weekdays. NOTE: Creating a shadow copy only makes one copy of the volume;... -
Page 44: Disabling Shadow Copies
Access Disk Management. Select the volume or logical drive, then right-click on it. Select Properties. Select the Shadow Copies tab. Select the volume that you want to redirect shadow copies from and ensure that shadow copies are disabled on that volume; if enabled, click Disable. Click Settings. -
Page 45: Shadow Copies For Shared Folders
Click the Shadow Copies tab. See Figure 15 (page 45). Figure 15 Accessing shadow copies from My Computer Shadow Copies for Shared Folders Shadow copies are accessed over the network by supported clients and protocols. There are two sets of supported protocols, SMB and NFS. All other protocols are not supported, including HTTP, FTP, AppleTalk, and NetWare Shares. -
Page 46: Smb Shadow Copies
SMB shadow copies Windows users can independently access previous versions of files stored on SMB shares by using the Shadow Copies for Shared Folders client. After the Shadow Copies for Shared Folders client is installed on the user's computer, the user can access shadow copies for a share by right-clicking on the share to open its Properties window, clicking the Previous Versions tab, and then selecting the desired shadow copy. -
Page 47: Nfs Shadow Copies
point-in-time copies of the file or folder contents that users can then open and explore like any other file or folder. Users can view files in the folder history, copy files from the folder history, and so NFS shadow copies UNIX users can independently access previous versions of files stored on NFS shares via the NFS client;... -
Page 48: Recovering An Overwritten Or Corrupted File
Recovering an overwritten or corrupted file Recovering an overwritten or corrupted file is easier than recovering a deleted file because the file itself can be right-clicked instead of the folder. To recover an overwritten or corrupted file: Right-click the overwritten or corrupted file, and then click Properties. Click Previous Versions. -
Page 49: Folder And Share Management
Create a shadow copy of the source data on the source server (read-only). Mask off (hide) the shadow copy from the source server. Unmask the shadow copy to a target server. Optionally, clear the read-only flags on the shadow copy. The data is now ready to use. - Page 50 Figure 17 Properties screen, Security tab Several options are available on the Security tab: To add users and groups to the permissions list, click Add. Follow the dialog box instructions. To remove users and groups from the permissions list, highlight the desired user or group, and then click Remove.
- Page 51 Figure 18 Advanced Security settings screen, Permissions tab Other functionality available in the Advanced Security Settings screen is illustrated in Figure 18 (page 51) and includes: Add a new user or group—Click Add, and then follow the dialog box instructions. Remove a user or group—...
- Page 52 Figure 19 User or group Permission Entry screen Another area of the Advanced Security Settings is the Auditing tab. Auditing allows you to set rules for the auditing of access, or attempted access, to files or folders. Users or groups can be added, deleted, viewed, or modified through the Advanced Security Settings Auditing tab.
- Page 53 Figure 20 Advanced Security Settings screen, Auditing tab Click Add to display the Auditing Entry screen. Figure 21 Auditing Entry for New Volume screen Click Select a principal to display the Select User or Group screen. Folder and share management...
- Page 54 Figure 22 Select User or Group screen NOTE: Click Advanced to search for users or groups. Select the user or group. Click OK. Select the desired Successful and Failed audits for the user or group. 10. Click OK. NOTE: Auditing must be enabled to configure this information. Use the local Computer Policy Editor to configure the audit policy on the storage system.
-
Page 55: Share Management
If it is also necessary to take ownership of subfolders and files, enable the Replace owner on subcontainers and objects box. Click OK. Share management There are several ways to set up and manage shares. Methods include using Windows Explorer, a command line interface, or Server Manger. -
Page 56: Comparing Administrative (Hidden) And Standard Shares
This method results in a hierarchical security model where the network protocol permissions and the file permissions work together to provide appropriate security for shares on the device. NOTE: Share permissions and file-level permissions are implemented separately. It is possible for files on a file system to have different permissions from those applied to a share. -
Page 57: Quota Management
Quota management On the Quota Management node of the File Server Resource Manager snap-in, you can perform the following tasks: Create quotas to limit the space allowed for a volume or folder and generate notifications when the quota limits are approached or exceeded. Generate auto quotas that apply to all existing folders in a volume or folder, as well as to any new subfolders created in the future. -
Page 58: Cluster Administration
6 Cluster administration One important feature of HP StoreEasy 3000 Storage systems is that they can operate as a single node or as a cluster. This chapter discusses cluster installation and cluster management issues. Cluster overview A failover cluster is a group of independent computers that work together to increase the availability of applications and services. -
Page 59: Resources
Resources Hardware and software components that are managed by the cluster service are called cluster resources. Cluster resources have three defining characteristics: They can be brought online and taken offline. They can be managed in a cluster. They can be owned by only one node at a time. Examples of cluster resources are IP addresses, network names, physical disk resources, and file shares. -
Page 60: Quorum Disk
service attempts to transfer the group to the next node on the preferred owner's list. If the transfer is successful, the resources are brought online in accordance with the resource dependency structure. The system failover policy defines how the cluster detects and responds to the failure of individual resources in the group. -
Page 61: Sequence Of Events For Cluster Resources
Figure 25 Cluster concepts diagram Sequence of events for cluster resources The sequence of events in the diagram includes: Physical disks are combined into RAID arrays and LUNs. LUNS are designated as basic disks, formatted, and assigned a drive letter via Disk Manager. Physical Disk resources are created for each basic disk inside Failover Cluster Management. -
Page 62: Cluster Planning
An IP Address resource is formed in the group and relates to the IP address by which the group's virtual server is identified on the network. A Network Name resource is formed in the group and relates to the name published on the network by which the group is identified. -
Page 63: Network Planning
The client must wait until the initial node is brought back online to access the share. HP recommends placing cluster aware and non cluster aware protocols on different file shares. Cluster planning... -
Page 64: Preparing For Cluster Installation
Using multipath data paths for high availability HP recommends that cluster configurations be deployed with dual data paths for high availability. Clusters can be configured with single path, but if a failure in the path occurs, all of the node resources will be failed to the non-affected node. -
Page 65: Shared Disk Requirements
A domain user account for Cluster service (all nodes must be members of the same domain) Each node should have at least two network adapters—one for connection to the public network and the other for the node-to-node private cluster network. If only one network adapter is used for both connections, the configuration is unsupported. -
Page 66: Setting Up Networks
RAID 1 configuration. Create a partition with a minimum of 512 MB to be used as a Quorum disk. HP recommends assigning the drive letter Q for the Quorum disk. It is also helpful to label the volume Quorum. Cluster administration... -
Page 67: Configuring Shared Disks
Configuring shared disks Use the Windows Disk Management utility to configure additional shared disk resources. Verify that all shared disks are formatted as NTFS and are designated as Basic. Additional shared disk resources are automatically added into the cluster as physical disk resources during the installation of cluster services. -
Page 68: Cluster Groups And Resources, Including File Shares
The following rules must be followed with geographically dispersed clusters: A network connection with latency of 500 milliseconds or less ensures that cluster consistency can be maintained. If the network latency is over 500 milliseconds, the cluster consistency cannot be easily maintained. All nodes must be on the same subnet. -
Page 69: File Share Resource Planning Issues
File share resource planning issues SMB and NFS are cluster-aware protocols that support the Active/Active cluster model, allowing resources to be distributed and processed on both nodes at the same time. For example, some NFS file share resources can be assigned to a group owned by a virtual server for Node A and additional NFS file share resources can be assigned to a group owned by a virtual server for Node Configuring the file shares as cluster resources provides for high availability of file shares. -
Page 70: Non Cluster Aware File Sharing Protocols
Map properly. ◦ Valid UNIX users should be mapped to valid Windows users. ◦ Valid UNIX groups should be mapped to valid Windows groups. ◦ Mapped Windows user must have the “Access this computer from the Network privilege” or the mapping will be squashed. ◦... -
Page 71: Creating File Share Resources
NOTE: Physical disk resources usually do not have any dependencies set. In multi-node clusters it is necessary to specify the node to move the group to. When a cluster group is moved to another node, all resources in that group are moved. When a physical disk resource is owned by a node, the disk appears as an unknown, unreadable disk to all other cluster nodes. -
Page 72: Msnfs Administration On A Server Cluster
MSNFS administration on a server cluster The Microsoft Services for Network File System (NFS) online help provides server cluster information for the following topics: Configuring shared folders on a server cluster ◦ Configuring an NFS share as a cluster resource ◦... -
Page 73: Advanced Cluster Administration Procedures
Create a dedicated group (if desired). Create a physical resource (disk) (if required, see note). Create an IP address resource for the Virtual Server to be created (if required, see note). Create a Virtual Server Resource (Network Name) (if required, see note). NOTE: If the printer spool resource is added to an existing group with a physical resource, IP address, and virtual server resource, steps 1-4 are not required. -
Page 74: Shutting Down One Cluster Node
The physical process of restarting one of the nodes of a cluster is the same as restarting a storage system in single node environment. However, additional caution is needed. Restarting a cluster node causes all cluster resources served by that node to fail over to the other nodes in the cluster based on the failover policy in place. -
Page 75: Troubleshooting, Servicing, And Maintenance
The ProLiant SNMP agents are enabled on the storage system by default and should not be disabled as they are used for internal management functions. If they are enabled for external client consumption, HP SIM must be configured so it does not attempt to communicate with these agents. -
Page 76: Determining The Current Storage System Software Version
The HP System Management Homepage (SMH) is a web-based interface that consolidates and simplifies single system management for HP servers. The SMH is the primary tool for identifying and troubleshooting hardware issues in the storage system. You may choose this option to diagnose a suspected hardware problem. -
Page 77: System Management Homepage Main Page
The Component Status Summary section displays links to all subsystems that have a critical, major, minor, or warning status. If there are no critical, major, minor or warning items, the Component Status Summary section displays no items. HP System Management Homepage... - Page 78 Enclosure This section provides information about the enclosure cooling, IDs, power, Unit Identification LED, PCIe devices, and I/O modules. NOTE: A large number of disk errors may indicate that an I/O module has failed. Inspect the I/O module LEDs on the storage system and any disk enclosures, and replace any failed component. Because both a system and drive fan are required, the maximum and minimum number of fans required is two.
-
Page 79: Certificate Of Authenticity
Logical Drives A list of logical drives associated with the controller appears in the left panel tree view. Select one of the logical volume entries to display the status of the volume, fault tolerance (RAID level), and capacity (volume size). A link to the logical volume is also displayed. Tape Drives This section provides information about tape drives, if they are included. - Page 80 To install the license key, see “Installing a license The SmartArray controller key with ACU” in the Configuring Arrays on HP Smart Array Controllers Reference that supports the Guide which can be downloaded from the following website: operating system drive is not licensed for RAID6.
- Page 81 Table 5 Known issues (continued) Issue Resolution the opportunity to assign network addresses to other network interfaces. After failed with the following addresses are assigned the network interfaces can be reconnected or enabled. error message: The WinRM client cannot process the request.
- Page 82 Table 5 Known issues (continued) Issue Resolution a. Get-partition Please ensure that all GPT DiskNumber <disk number from above> disks have a Microsoft remove-Partition Confirm Reserved Partition (MSR) b. New-partition DiskNumber <disk number from above> present. Error: 0x80070022 -Size 128MB GptType ‘{e3c9e316-0b5c-4db8-817d-f92df00215ae}' c.
-
Page 83: Error Codes
The SMI-S provider registration with To register SMI-S provider with the HP StoreEasy 3000 Storage, ensure that the HP StoreEasy 3000 Storage might array is reachable from the node. Perform the following steps on all nodes: fail due to the following reasons: Open an elevated PowerShell command prompt. -
Page 84: Hp Support Websites
(http:// www.hp.com/go/support) to troubleshoot problems with the storage system. After entering the storage system name and designation (for example, HP StoreEasy 3000 Storage) or component information (for example, SAS I/O module), use the following links for troubleshooting information: Download drivers and software—Provides drivers and software for your operating system. -
Page 85: Autonomy Livevault
After running the Smart Component, you must shut down and then restart your system for the changes to take effect. On multi-node clusters, such as HP StoreEasy 3000 Storage systems, HP recommends that you move cluster resources to another node before shutting down the node that is being renamed. -
Page 86: Storage System Recovery
During system recovery, you can replace the existing drives with drives of the same size or larger. HP recommends that the replacement drives be the same type as the original drives, but it is not required. However, drives in the same RAID group must all be the same type (you cannot mix drive types in a RAID group). -
Page 87: Using A Usb Flash Drive For Storage System Recovery
Reboot the server blade to either the USB flash device or USB DVD drive. The system BIOS attempts to boot to the USB device first by default. Watch the monitor output during the boot as you may need to press a key to boot to the USB media. NOTE: If directly connected, you may have to change the BIOS settings to ensure proper boot sequence. -
Page 88: Recovering Both Servers
(containing at least one node) Windows failover cluster, follow the procedure for “Recovering both servers” (page 88). The following procedure describes how to re-image one of the server blades of the HP StoreEasy 3000 Storage system, and then rejoin the server to the Windows failover cluster: Follow the steps in “Restoring the factory image with a DVD or USB flash device”... -
Page 89: Restoring The System With Windows Recovery Environment
Select the time and date shown in the lower right corner of the task bar. Click the Change date and time settings link. Set the time zone of the server to be the same time zone as the other 3840 server and the domain controller. Adjust the time of day, if needed. Windows Server Manager opens when the ICT window is closed. - Page 90 Reboot the server to either the USB flash device or USB DVD drive. The system BIOS attempts to boot to the USB device by default. Watch the monitor output during the boot as you may need to press a key to boot to the USB media. NOTE: If directly connected, you may have to change the BIOS settings to ensure proper boot sequence.
- Page 91 17. Click Yes on the confirmation message to proceed with Windows recovery. IMPORTANT: Do not interrupt the recovery process. 18. Remove the directly connected DVD or flash device (or remotely connected iLO virtual DVD or flash device) from the server. Restoring the system with Windows Recovery Environment...
-
Page 92: Support And Other Resources
Operating system type and revision level Detailed questions Subscription service HP recommends that you register your product at the Subscriber's Choice for Business website: http://www.hp.com/go/e-updates After registering, you receive email notification of product enhancements, new driver versions, firmware updates, and other product resources. -
Page 93: Rack Stability
HP customer self repair (CSR) programs allow you to repair your storage product. If a CSR part needs replacing, HP ships the part directly to you so that you can install it at your convenience. Some parts do not qualify for CSR. Your HP-authorized service provider will determine whether a repair can be accomplished by CSR. -
Page 94: 10 Documentation Feedback
10 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (docsfeedback@hp.com). Include the document title and part number, version number, or the URL when submitting your feedback. -
Page 95: A Operating System Logical Drives
Physical Drives 1–2 NOTE: In the HP Array Configuration Utility (ACU), mapping of logical disks begins at 1. In Microsoft Disk Manager, mapping begins at 0. If the operating system has a failure that might result from corrupt system files, a corrupt registry, or the system hangs during boot, see “Storage system recovery”... -
Page 96: B Regulatory Information
Hewlett-Packard Company, 3000 Hanover Street, Palo Alto, California 94304, U.S. Local Representative information Russian: HP Russia: ЗАО “Хьюлетт-Паккард А.О.”, 125171, Россия, г. Москва, Ленинградское шоссе, 16А, стр.3, тел/факс: +7 (495) 797 35 00, +7 (495) 287 89 05 HP Belarus: ИООО «Хьюлетт-Паккард Бел», 220030, Беларусь, г. Минск, ул. - Page 97 HP Enterprise Servers http://www.hp.com/support/EnterpriseServers-Warranties HP Storage Products http://www.hp.com/support/Storage-Warranties HP Networking Products http://www.hp.com/support/Networking-Warranties Warranty information...
- Page 98 (such as a server that hosts Exchange or SQL Server) and a target device (such as the HP All-in-One Storage System). By carrying SCSI commands over IP networks, iSCSI is used to facilitate data transfers over intranets and to manage storage over long distances.
- Page 99 Logical unit number. A LUN results from mapping a logical unit number, port ID, and LDEV ID to a RAID group. The size of the LUN is determined by the emulation mode of the LDEV and the number of LDEVs associated with the LUN. mount point A host's file system path or directory name where a host volume (device) is accessed.
- Page 100 61, server, file system elements, configuring file-sharing protocols, private network adapter, files, ownership, shared disks, folder management, connectivity, verifying, folder recovery, contacting HP, folders customer self repair, auditing access, managing, 100 Index...
- Page 101 OpsMgr see Microsoft Systems Center Operations Manager (SCOM) hardware components HP StoreEasy 3840 Gateway Storage, partitions HP StoreEasy 3840 Gateway Storage Blade, extended, primary, Array Configuration Utility, permissions Storage Manager, file level,...
- Page 102 HP Enterprise servers, SMB, share support, HP Networking products, software components, HP ProLiant and X86 Servers and Options, storage management HP Storage products, elements, websites overview, customer self repair, process, storage reports, storage, adding to a cluster,...